PV equipments‎ > ‎

PV Ribbon Cutting Machine


The flat cutter is controlled by a microprocessor. A display shows all values (material length, the number of cuts and the transport speed) and error conditions indicated. After a test cut the length with the built-in tape measure can be checked immediately. A dimensional correction is possible before the automatic mode.It cuts up to 6,000 parts per hour.

  • Dimensions 350x260x250
  • Cutting length 0,1 mm up to 99,99mm 
  • Cutting precision 0,2 +/- 0,002 x cutting length
  • Process capacity L = 100 mm, 100 pcs/min
  • Programs memory 10
  • internal memory

 System Description: 


economically

Because of the easy handling and low price the flat cutter is is economical to use already at samples and small series. Already at an operating hour per month to pay for the device by itself, because you will save a lot of working hours compared to manual cutting.

Best cutting quality

The self-sharpening knife guaranties over a million cuts. Similarly, the blades are easily re-placed and cleaned. Each blade has two cutting edges. The on both sides driven transport rollers ensure precise cutting lengths.

easy to operate

The flat cutter is controlled by a microprocessor. The handling is comfortable and easy. The on-line display shows all values, conditions, and error messages.

The operator is guided step by step through the programming. The parameters are succession the material length, the number of cuts and the transport speed. After a test cut the length with the built-in tape measure to be checked immediately. A dimensional correction is possible before starting the automatic mode.